Everything You Need to Know About Bike Tire Pumps

Everything You Need to Know About Bike Tire Pumps

In order for bikes to be fun quickly, you must pump up your bike frequently, and most beginner bikers are unaware of this vital truth.
As a cyclist, you should spend some money on track pumps because they will come in handy. Yes! You can also use a tiny bike tire pump, but this is a time-consuming process that not everyone appreciates.
The second question that may come to mind is how frequently you should limp your bike tires. So it all relies on how much you have to ride your bike and how much you intend to ride it in the future. The more you ride, the more pumping you'll need.


Bike Tire Pumps and Their Varieties

1. Track Pumps

These, sometimes known as floor pumps, make tire inflation simple and quick. It's a little heavy, but it's fine to keep at home while you work.

2. Mini Pump

Mini pumps are ideal for frequent riders because they are small and portable. So, if you need a portable pump, get a tiny pump; nevertheless, it is not as effective as a track pump because it takes longer to pump and is more difficult to use.

3.Co2 Inflators

Racers favor these since they are lighter than small pumps. These are not only easier to operate, but also faster.

How To Pump A Bike Tire

So, now that you know everything there is to know about pumps and why you should pump your bike tires, let's move on to a very interesting topic about how to pump a bike tire. The procedure is as follows:

1. Get The Right Bike Tire Pump

On a bicycle tire, there are two types of valves: the Presta valve and the Schrader valve. Depending on the model of your bike, there will be either valve.

After examining the valve type, see if your bike pump is compatible with it; if not, replace the pump. Pumps are generally compatible with Schrader type valves, therefore if you have a Presta valve, you may need an extra adaptor if a matching bike pump is not available.

2. Know Tire Pressure Required

If you apply too much pressure, the tore may explode. If you don't know what PSI is, go to a bike shop or consult an adult, as indicated above.

In general, road bikes require 80-130 PSI, hybrid tires demand 40-70 PSI, and mountain bikes require 25-35 PSI.

3. Open The Valve Cap

Remove the valve's cap and store it safely. In the Presta valve, an additional lock not is usually provided, so you must remove it first, although there is none in the Schrade valve.

4. Keep The Valve Over The Pump

If you cycle every day, keep a hand pump with you at all times. When pumping, you can use a floor pump if you are at home or a hand pump if you are on the road. Pumps have two nozzles that fit on both types of valves, so simply select the appropriate nozzle, set it on the valve, and push it into place.

5. Read The Instructions

Read the directions on the pump and follow them exactly. Bike pumps are simple to use and usually don't require any knowledge, but if you're unsure, ask for assistance.

6. Inflate The Tire

Begin pumping and inflating the tire as needed, and then simply remove the nozzle from the valve. Don't forget to thoroughly inspect the pressure gauge to confirm that the proper pressure has been inflated.

7. What To Do On Overinflation

If you have overinflated the tire, try to let some air out of the tube to reduce the PSI. If you have a Schrader valve, place your finger on it and press it until it is balanced. Unlock the Presta valve's but lock and pressurize the valve to let the air escape.

8. Close The Valve

Last but not least, simply close the valve. For the Schrade, the valve settles the plastic cap on the valve while for the Presta valve tighten the nut lock and then keep the plastic cap on it.


Pumping a bike tire is a simple chore that should not be underestimated. Pumping efficiently requires some knowledge of PSI, pump, and bike type; otherwise, it will be a tremendous waste of time for you and may deteriorate the tire's condition. So, don't rush to pump your bike's tire; instead, be patient, brush up on your expertise, and then go!

0 commentaires
Retour au blog

Laisser un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés.